## Configuration file for software management ## /etc/zypp/zypp.conf ## ## Boolean values are 0 1 yes no on off true false [main] ## ## Override the detected architecture ## ## Valid values: i586, i686, x86_64, ppc, ppc64, ia64, s390, s390x, .. ## Default value: Autodetected ## ## ** CAUTION: Only set if you know what you're doing ! ## ** Changing this needs a full refresh (incl. download) ## ** of all repository data. ## # arch = s390 arch = x86_64 ## ## Path where the caches are kept. ## ## Valid values: A directory ## Default value: /var/cache/zypp ## # cachedir = /var/cache/zypp ## ## Path where the repo metadata is downloaded and kept. ## ## Valid values: A directory ## Default value: {cachedir}/raw ## ## Changing this needs a full refresh (incl. download) of all repository data ## # metadatadir = /var/cache/zypp/raw ## ## Path where the repo solv files are created and kept. ## ## Valid values: A directory ## Default value: {cachedir}/solv ## # solvfilesdir = /var/cache/zypp/solv ## ## Path where the repo packages are downloaded and kept. ## ## Valid values: A directory ## Default value: {cachedir}/packages ## # packagesdir = /var/cache/zypp/packages ## ## Path where the configuration files are kept. ## ## Valid values: A directory ## Default value: /etc/zypp ## # configdir = /etc/zypp ## ## Path where the known repositories .repo files are kept ## ## Valid values: A directory ## Default value: {configdir}/repos.d ## ## Changing this invalidates all known repositories ## # reposdir = /etc/zypp/repos.d ## ## Path where the known services .service files are kept ## ## Valid values: A directory ## Default value: {configdir}/services.d ## ## Changing this invalidates all known services ## # servicesdir = /etc/zypp/services.d ## ## Whether repository urls should be probed when added ## ## Valid values: boolean ## Default value: false ## ## If true, accessability of repositories is checked immediately (when added) ## (e.g. 'zypper ar' will check immediately) ## If false, accessability of repositories is checked when refreshed ## (e.g. 'zypper ar' will delay the check until the next refresh) ## # repo.add.probe = false ## ## Amount of time in minutes that must pass before another refresh. ## ## Valid values: Integer ## Default value: 10 ## ## If you have autorefresh enabled for a repository, it is checked for ## up-to-date metadata not more often than every ## minutes. If an automatic request for refresh comes before ## minutes passed since the last check, the request is ignored. ## ## A value of 0 means the repository will always be checked. To get the oposite ## effect, disable autorefresh for your repositories. ## ## This option has no effect for repositories with autorefresh disabled, nor for ## user-requested refresh. ## # repo.refresh.delay = 10 ## ## Translated package descriptions to download from repos. ## ## A list of locales for which translated package descriptions should ## be downloaded, in case they are availavble and the repo supports this. ## Not all repo formats support downloading specific translations only. ## ## Valid values: List of locales like 'en', 'en_US'... ## Default value: RequestedLocales ## ## If data for a specific locale are not available, we try to find some ## fallback. Translations for 'en' are always downloaded. ## # repo.refresh.locales = en, de ## ## Maximum number of concurrent connections to use per transfer ## ## Valid values: Integer ## Default value: 5 ## ## This setting is only used if more than one is possible ## Setting it to a reasonable number avoids flooding servers ## # download.max_concurrent_connections = 5 ## ## Sets the minimum download speed (bytes per second) ## until the connection is dropped ## This can be useful to prevent security attacks on hosts by ## providing updates at very low speeds. ## ## 0 means no limit ## # download.min_download_speed = 0 ## Maximum download speed (bytes per second) ## 0 means no limit # download.max_download_speed = 0 ## Number of tries per download which will be ## done without user interaction ## 0 means no limit (use with caution) # download.max_silent_tries = 5 ## ## Maximum time in seconds that you allow a transfer operation to take. ## ## This is useful for preventing your batch jobs from hanging for hours due ## to slow networks or links going down. Limiting operations to less than a ## few minutes risk aborting perfectly normal operations. ## ## Valid values: [0,3600] ## Default value: 180 ## # download.transfer_timeout = 180 ## ## Whether to consider using a .delta.rpm when downloading a package ## ## Valid values: boolean ## Default value: true ## ## Using a delta rpm will decrease the download size for package updates ## since it does not contain all files of the package but only the binary ## diff of changed ones. Recreating the rpm package on the local machine ## is an expensive operation (memory,CPU). If your network connection is ## not too slow, you benefit from disabling .delta.rpm. ## # download.use_deltarpm = true download.use_deltarpm = false ## ## Whether to consider using a deltarpm even when rpm is local ## ## Valid values: boolean ## Default value: false ## ## This option has no effect unless download.use_deltarpm is set true. ## # download.use_deltarpm.always = false ## ## Hint which media to prefer when installing packages (download vs. CD). ## ## Valid values: download, volatile ## Default value: download ## ## Note that this just a hint. First of all the solver will choose the 'best' ## package according to its repos priority, version and architecture. But if ## there is a choice, we will prefer packages from the desired media. ## ## Packages available locally are always preferred. The question is whether ## you prefer packages being downloaded via FTP/HTTP/HTTPS (download), rather ## than being prompted to insert a CD/DVD (volatile), in case they are available ## on both media. ## ## Name | Priority | URI ## openSUSE-11.1 99 dvd:/// ## openSUSE-11.1-Oss 99 http://download.opensuse.org/distribution/11.1/repo/oss ## ## In the above example 2 repositories with similar content are used. Rather ## than raising the priority of one of them to 'prefer' a certain media, you ## should use the same priority for both and set download.media_preference ## instead. ## ## download.media_preference = download ## ## Signature checking (repodata and rpm packages) ## ## boolean gpgcheck (default: on) ## boolean repo_gpgcheck (default: unset -> according to gpgcheck) ## boolean pkg_gpgcheck (default: unset -> according to gpgcheck) ## ## If 'gpgcheck' is 'on' we will either check the signature of repo metadata ## (packages are secured via checksum in the metadata), or the signature of ## an rpm package to install if it's repo metadata are not signed or not ## checked. ## ## The default behavior can be altered by explicitly setting 'repo_gpgcheck' and/or ## 'pkg_gpgcheck' to perform those checks always (if 'on') or never (if 'off'). ## ## Explicitly setting 'gpgcheck', 'repo_gpgcheck' 'pkg_gpgcheck' in a ## repositories .repo file will overwrite the defaults here. ## ## DISABLING GPG CHECKS IS NOT RECOMMENDED. ## Signing data enables the recipient to verify that no modifications ## occurred after the data were signed. Accepting data with no, wrong ## or unknown signature can lead to a corrupted system and in extreme ## cases even to a system compromise. ## # repo_gpgcheck = unset -> according to gpgcheck # pkg_gpgcheck = unset -> according to gpgcheck ## ## Commit download policy to use as default. ## ## DownloadOnly, Just download all packages to the local cache. ## Do not install. Implies a dry-run. ## ## DownloadInAdvance, First download all packages to the local cache. ## Then start to install. ## ## DownloadInHeaps, Similar to DownloadInAdvance, but try to split ## the transaction into heaps, where at the end of ## each heap a consistent system state is reached. ## ## DownloadAsNeeded Alternating download and install. Packages are ## cached just to avid CD/DVD hopping. This is the ## traditional behaviour. ## ## If a value is not set, empty or unknown, we pick ## some sane default. ## ## commit.downloadMode = ## ## Defining directory which contains vendor description files. ## ## One file in this directory reflects a group of equivalent vendors. e.G.: ## (filename is "nvidia" but could be any other name): ## ------------------------- file contains begin ----------------------- ## [main] ## ## vendors = nvidia,suse,opensuse ## ## ------------------------- file contains end ----------------------- ## Libzypp makes an string comparision (like strncmp, case-insensitive) ## whereas the beginning of the strings are compared only. ## e.G. vendor "opensuse11.0" is compatible to "openSuSE". ## ## Valid values: A directory ## Default value: {configdir}/vendors.d ## # vendordir = /etc/zypp/vendors.d ## ## Whether required packages are installed ONLY ## So recommended packages, language packages and packages which depend ## on hardware (modalias) will not be regarded. ## ## Valid values: boolean ## Default value: false ## # solver.onlyRequires = false ## ## EXPERTS ONLY: Per default the solver will not replace packages of ## different vendors, unless you explicitly ask to do so. Setting this ## option to TRUE will disable this vendor check (unless the application ## explicitly re-enables it). Packages will then be considered based on ## repository priority and version only. This may easily damage your system. ## ## CHANGING THE DEFAULT IS NOT RECOMMENDED. ## ## Valid values: boolean ## Default value: false ## # solver.allowVendorChange = false ## ## EXPERTS ONLY: Cleanup when deleting packages. Whether the solver should ## per default try to remove packages exclusively required by the ones he's ## asked to delete. ## ## This option should be used on a case by case basis, enabled via ## command line options or switches the applications offer. Changing ## the global default on a system where unattended actions are performed, ## may easily damage your system. ## ## CHANGING THE DEFAULT IS NOT RECOMMENDED. ## ## Valid values: boolean ## Default value: false ## # solver.cleandepsOnRemove = false ## ## This file contains requirements/conflicts which fulfill the ## needs of a running system. ## For example the system would be broken if not glibc or kernel is ## installed. ## So the user will be informed if these packages will be deleted. ## ## Format: Each line represents one dependency: ## e.g. ## requires:kernel ## requires:glibc ## Default value: {configdir}/systemCheck ## # solver.checkSystemFile = /etc/zypp/systemCheck ## ## When committing a dist upgrade (e.g. 'zypper dup') a solver testcase ## is written to /var/log/updateTestcase-. It is needed in bugreports. ## This option returns the number of testcases to keep on the system. Old ## cases will be deleted, as new ones are created. ## ## Use 0 to write no testcase at all, or -1 to keep all testcases. ## ## Valid values: Integer ## Default value: 2 ## # solver.upgradeTestcasesToKeep = 2 ## ## Whether dist upgrade should remove a products dropped packages. ## ## A new product may suggest a list of old and no longer supported ## packages (dropped packages). Performing a dist upgrade the solver ## may try to delete them, even if they do not cause any dependency ## problem. ## ## Turning this option off, the solver will not try to remove those ## packages unless they actually do cause dependency trouble. You may ## do the cleanup manually, or simply leave them installed as long ## as you don't need the disk space. ## ## Valid values: Boolean ## Default value: true ## # solver.upgradeRemoveDroppedPackages = true ## ## Packages which can be installed in different versions at the same time. ## ## Packages are selected either by name, or by provides. In the later case ## the string must start with "provides:" immediately followed by the capability. ## ## Example: ## kernel - just packages whith name 'kernel' ## provides:multiversion(kernel) - all packages providing 'multiversion(kernel)' ## (kenel and kmp packages should do this) ## Valid values: ## Comma separated list of packages. ## ## Default value: ## empty ## multiversion = provides:multiversion(kernel) ## ## Defining directory which may contain additional multiversion definitions. ## ## If the directory exists, each file in this directory is scanned, expecting ## one valid multiversion list entry per line. Empty lines and lines starting ## with '#' are ignored. ## ------------------------- [/etc/zypp/multiversion.d/example file begin] ----------------------- ## # An alternate way to enable kernel packages being ## # installed in parallel: ## ## provides:multiversion(kernel) ## ------------------------- [/etc/zypp/multiversion.d/example file end] ----------------------- ## ## Valid values: A directory ## Default value: {configdir}/multiversion.d ## # multiversiondir = /etc/zypp/multiversion.d ## Comma separated list of kernel packages to keep installed in parallel, if the ## above multiversion variable is set. Packages can be specified as ## 2.6.32.12-0.7 - Exact version to keep ## latest - Keep kernel with the highest version number ## latest-N - Keep kernel with the Nth highest version number ## running - Keep the running kernel ## oldest - Keep kernel with the lowest version number (the GA kernel) ## oldest+N - Keep kernel with the Nth lowest version number ## ## Note: This entry is not evaluated by libzypp, but by the ## purge-kernels service (via /sbin/purge-kernels). ## ## Default: Do not delete any kernels if multiversion = provides:multiversion(kernel) is set multiversion.kernels = latest,latest-1,running ## ## Path to locks file. If not exist then is create. ## In this file is saved also UI locks. ## ## valid value: path to file or place where file can be created ## default value: {configdir}/locks ## # locksfile.path = /etc/zypp/locks ## ## Whether to apply locks in locks file after zypp start. ## ## Valid values: boolean ## Default value: true ## # locksfile.apply = true ## ## Where update items are stored ## (example: scripts, messages) ## ## Valid values: path to directory ## Default value: /var/adm ## # update.datadir = /var/adm ## ## Where update messages are stored ## ## Valid values: path to directory ## Default value: {update.datadir}/update-messages ## # update.messagesdir = /var/adm/update-messages ## ## Where update scripts are stored ## ## Valid values: path to directory ## Default value: {update.datadir}/update-scripts ## # update.scriptsdir = /var/adm/update-scripts ## ## Command to be invoked to send update messages. ## ## Packages may leave an update message file in {update.messagesdir}. ## At the end of each commit, zypp collects those messages and may send ## a notification to the user. ## ## zypp will prepare the update messages according to the selected ## content format and pipe the content to the command. ## ## Format: ## single - For each update message invoke the command and send ## the message. ## none - For each update message invoke the command but don't ## use a pipe to send any data. You probably want to pass ## the message file on the commandline using %P (see ## Substitutions). ## digest - Single invocation of the command, sending the path ## names of all update message. One per line. ## bulk - Single invocation of the command, sending the ## concatenated content of all update messages, separated ## by Ctrl-L. ## ## Substitutions: ## %p - package identification (name-version-release.arch) ## %P - full path to the update message file ## ## Valid values: The value is specified as "format | command". ## An empty value will turn off any notification. ## ## Examples: single | mail -s 'Update message from %p' root ## none | my-send-script -f %P ## ## Default value: single | /usr/lib/zypp/notify-message -p %p ## # update.messages.notify = single | /usr/lib/zypp/notify-message -p %p ## ## Options for package installation: excludedocs ## ## Don't install any files which are marked as documentation. ## ## Valid values: boolean ## Default value: no ## # rpm.install.excludedocs = no ## ## Location of history log file. ## ## The history log is described at ## http://en.opensuse.org/Libzypp/Package_History ## ## Valid values: absolute path to a file ## Default value: /var/log/zypp/history ## # history.logfile = /var/log/zypp/history ## ## Global credentials directory path. ## ## If a URL contains ?credentials= parameter, the credentials will ## be stored and looked for in a file named in this directory. ## ## Valid values: absolute path to a directory ## Default value: /etc/zypp/credentials.d ## # credentials.global.dir = /etc/zypp/credentials.d ## ## Global credentials catalog file path. ## ## This file contains a catalog of all known user credentials which were ## not stored via the ?credentials= URL parameter, i.e. passed ## in URL as username:password component, or entered by user in ## an authentication dialog. ## ## Valid values: absolute path to a file ## Default value: /etc/zypp/credentials.cat ## # credentials.global.file = /etc/zypp/credentials.cat